Leica Usb Cable Driver For Windows 7 573
Leica USB Cable Driver for Windows 7 573: A Guide
If you have a Leica device such as a CS20 field controller, TS16 or TS60 total station or MS60 MultiStation, you may need to connect it to your PC via USB cable for various purposes. For example, you may want to transfer data to and from the device, update the firmware or software, or access the online services of Leica. However, to do that, you need to install the Leica USB cable driver for Windows 7 573 on your PC. In this article, we will show you how to download and install the Leica USB cable driver for Windows 7 573 and how to connect your Leica device to your PC.
leica usb cable driver for windows 7 573
What is the Leica USB cable driver for Windows 7 573?
The Leica USB cable driver for Windows 7 573 is a software that enables your PC to recognize and communicate with your Leica device via USB cable. It is a necessary component for connecting your Leica device to your PC and accessing its features and functions.
Please note that the Leica USB cable driver for Windows 7 573 is different from the previous USB drivers that were used for SmartWorx Viva instruments. The new driver is compatible with both SmartWorx Viva and Leica Captivate systems. The driver supports Windows 7, Windows 8 (8.1) and Windows 10 operating systems.
How to download the Leica USB cable driver for Windows 7 573?
You can download the Leica USB cable driver for Windows 7 573 from two sources:
The USB card that was delivered with your Leica device. You can find the Leica Driver installation folder on the USB card and run the appropriate .exe file depending on your operating system (32bit or 64bit).
The myWorld @ Leica Geosystems website. You need to register your Leica device on the website and go to myProducts section. Then you can select your device and open the Tools tab. You will see a Download button next to the USB Driver file.
How to install the Leica USB cable driver for Windows 7 573?
After downloading the Leica USB cable driver for Windows 7 573, you can install it on your PC by following these steps:
Make sure that your Leica device is unplugged from your PC during the installation process.
Run the .exe file that you downloaded and follow the instructions on the screen. You may need to agree to the terms and conditions and choose the destination folder for the software.
If you don't have Windows Mobile Device Center installed on your PC, it will be installed automatically during the setup. This is a software that allows you to explore files on your Leica device.
Finish the installation process and restart your PC if necessary.
How to connect your Leica device to your PC via USB cable?
After installing the Leica USB cable driver for Windows 7 573, you can connect your Leica device to your PC via USB cable by following these steps:
Turn on your Leica device and connect it to your PC using one of these cables:
GEV234 or GEV261: These are Lemo cables that can be used for CS20, TS60 and MS60 devices. You need to connect them to the Lemo port of the device and to the USB port of your PC.
GEV223: This is a mini USB cable that can be used for TS16 devices. You need to connect it to the mini-USB port of the device and to the USB port of your PC.
On your PC, press the Windows Start icon and type \\\\192.168.254.1\\ (for CS20 devices) or \\\\192.168.254.3\\ (for TS16, TS60 or MS60 devices) into the search field and press Enter.
A File Explorer window will open and you will be able to browse the folders of your Leica device and copy and paste files as required.
Conclusion
The Leica USB cable driver for Windows 7 573 is a software that allows you to connect your Leica device to your PC via USB cable and access its features and functions. You can download it from the USB card that came with your device or from the myWorld @ Leica Geosystems website. You can install it easily by running the .exe file and following the instructions on the screen. You can connect your device using one of these cables: GEV234, GEV261 or GEV223 depending on your device model. You can then use File Explorer or Windows Mobile Device Center to explore files on your device.
How to update the Leica USB cable driver for Windows 7 573?
The Leica USB cable driver for Windows 7 573 is a software that is constantly being improved and updated by the developers. You can update the Leica USB cable driver for Windows 7 573 to get the latest features and fixes. You can update the Leica USB cable driver for Windows 7 573 in two ways:
Automatic update: You can enable the automatic update option in the settings of the Leica USB cable driver. This way, the driver will check for updates online and download and install them automatically when they are available. You can also set the frequency of the automatic update, such as daily, weekly or monthly.
Manual update: You can check for updates manually by clicking on the Check for Updates button in the settings of the Leica USB cable driver. This way, the driver will check for updates online and show you if there are any available. You can then choose to download and install them or not.
How to uninstall the Leica USB cable driver for Windows 7 573?
If you no longer need or want to use the Leica USB cable driver for Windows 7 573, you can uninstall it from your PC easily. You can uninstall the Leica USB cable driver for Windows 7 573 by following these steps:
Go to the Control Panel and select Programs and Features. Find the Leica USB cable driver in the list of installed programs and click on it.
Click on Uninstall and follow the instructions on the screen. You may need to confirm your decision and enter your password if prompted.
Wait for the uninstallation process to complete and restart your PC if necessary.
Delete any leftover files or folders of the Leica USB cable driver from your PC.
How to use the Leica USB cable driver for Windows 7 573?
Once you have installed the Leica USB cable driver for Windows 7 573 and connected your Leica device to your PC, you can use it for various purposes. Some of the purposes are:
Transfer data to and from your Leica device. You can use File Explorer or Windows Mobile Device Center to browse the folders of your Leica device and copy and paste files as required. You can also use MicroSurvey Transfer program to quickly transfer files back and forth between PC and CS15 folders for FieldGenius or Layout.
Update the firmware or software of your Leica device. You can use myWorld @ Leica Geosystems website to check for the latest updates for your Leica device and download and install them on your device.
Access the online services of Leica. You can use myWorld @ Leica Geosystems website to register your Leica device, access technical support, download manuals and guides, view tutorials and videos, and more.
What are the features and advantages of the Leica USB cable driver for Windows 7 573?
The Leica USB cable driver for Windows 7 573 is a software that has many features and advantages for the users of Leica devices. Some of the features and advantages are:
It is compatible with both SmartWorx Viva and Leica Captivate systems. You can use it to connect any Leica device that runs on these systems to your PC.
It supports Windows 7, Windows 8 (8.1) and Windows 10 operating systems. You can use it on any PC that runs on these operating systems.
It is easy to install, update and uninstall. You can download it from the USB card that came with your device or from the myWorld @ Leica Geosystems website. You can install it by running the .exe file and following the instructions on the screen. You can update it by enabling the automatic update option or by checking for updates manually. You can uninstall it by going to the Control Panel and selecting Programs and Features.
It enables your PC to recognize and communicate with your Leica device via USB cable. You can use it to transfer data to and from your device, update the firmware or software of your device, or access the online services of Leica.
What are the system requirements for the Leica USB cable driver for Windows 7 573?
The Leica USB cable driver for Windows 7 573 is a software that has some system requirements for your PC and your Leica device. You need to meet these system requirements to use the software properly. Some of the system requirements are:
For your PC: You need to have a PC that runs on Windows 7 573 operating system. You also need to have a USB port that supports USB 2.0 or higher. You also need to have enough disk space and memory to install and run the software.
For your Leica device: You need to have a Leica device that runs on SmartWorx Viva or Leica Captivate systems. You also need to have a USB cable that matches your device model and your PC port. You also need to have enough battery power and storage space on your device.
How to use the Leica USB cable driver for Windows 7 573 with other software?
The Leica USB cable driver for Windows 7 573 is a software that can work with other software that are compatible with your Leica device. You can use the software to enhance the functionality and performance of your device and your PC. Some of the software that you can use with the Leica USB cable driver for Windows 7 573 are:
Leica Captivate: This is a software that allows you to capture and manage complex data with your Leica device. You can use the Leica USB cable driver for Windows 7 573 to connect your device to your PC and transfer data between them.
Leica Infinity: This is a software that allows you to process, analyze and visualize geospatial data with your PC. You can use the Leica USB cable driver for Windows 7 573 to connect your device to your PC and import data from your device to the software.
Leica Geo Office: This is a software that allows you to manage, combine and process data from different sources with your PC. You can use the Leica USB cable driver for Windows 7 573 to connect your device to your PC and export data from the software to your device.
Conclusion
The Leica USB cable driver for Windows 7 573 is a software that enables your PC to recognize and communicate with your Leica device via USB cable. It is a necessary component for connecting your Leica device to your PC and accessing its features and functions.
You can download the Leica USB cable driver for Windows 7 573 from the USB card that was delivered with your Leica device or from the myWorld @ Leica Geosystems website. You can install it easily by running the .exe file and following the instructions on the screen. You can update it automatically or manually by checking for updates online. You can uninstall it by going to the Control Panel and selecting Programs and Features.
You can connect your Leica device to your PC using one of these cables: GEV234, GEV261 or GEV223 depending on your device model. You can then use File Explorer, Windows Mobile Device Center or MicroSurvey Transfer program to transfer data to and from your device. You can also use myWorld @ Leica Geosystems website to update the firmware or software of your device or access the online services of Leica. You can also use other software such as Leica Captivate, Leica Infinity or Leica Geo Office to work with your device and your PC.
If you have any problems with the Leica USB cable driver for Windows 7 573 or your Leica device, you can try some troubleshooting steps to fix the issue. You can also contact Leica support for help by email or phone.
If you are looking for a software that can connect your Leica device to your PC via USB cable, you should try the Leica USB cable driver for Windows 7 573. 6c859133af
https://soundcloud.com/riatokeda1983/what-is-3cx-system
https://soundcloud.com/stafvirtafa1985/siemens-nx-cracked-version